My Blog

Whatever rings Mel's bells

Archive for September, 2014

I made a THING today!

 

After

Isn’t it pretty?  The purple briolettes and rounds are amethyst, and the tiny rounds and larger ovals are natural aquamarine.  It started out looking like this:

Before

“But what is it?” you might ask, and you’re right to ask the question.

I’m really not sure.

Perhaps it’s the middle of a new necklace.  Or maybe, my first set of bodice jewelry.  Tho it’s a little small for that.

Honestly, I’m just not sure yet.  But it came out exactly as I wanted it to, so I’m very pleased.  And I’m sure I’ll figure out what to do with it later!

So I guess, stay tuned.  Sooner or later, this little thing is gonna come back as part of something really fabulous.  And whatever it becomes, I think you’re gonna like it!

How many are really in there?

Behold, a bag of 100 bells.  Red, aluminum, shiny, very pretty.  Perfect for holiday creations, Mardi Gras, Valentines, or anything you think should be jingly and red.

But wait!  Are you sure there are really 100 bells in there?  Maybe we should check.

Let's count.  1, 2, 3, 4, 5, 6...

 

Start counting!  1, 2, 3, 4, 5…

24, 25, 26, 27...  Keep counting!

 

Keep counting!  24, 25, 26, 27…

That's a lot of bells!

 

That’s a lot of bells!  There have to be at least 100 there, right?

Hmmm.  Actually, there aren’t 100 bells in the bag, there are 104.

How many bells do you have?!?

 

This bag of green bells has 106!

So what’s the deal with the extras, then?  Isn’t it enough to give people what they’re paying for exactly?

Well, sure, it’s enough.  I mean, when two people strike a bargain, they each agree to provide something specific.  As long as both parties carry through with what they promise, that’s pretty even-Steven.  And for the most part, my counts are exactly what you’d expect them to be – a lot of 36 stone beads will have 36 beads in it.  A 16″ strand will be 16″ long.  (Well, if the 16″ mark lands in the middle of a bead, of course it might be slightly longer.)

But when it comes to bells, or beads, or jump rings, I use what are called heavy counts.  In other words, I’ll count out 100 of the item, then I’ll throw in another 3 or 4 or 5.  Sometimes I’ll have a few extras and no ideas to use them myself, so I’ll just add them to the packs I’m selling.  Also, although I sort all my loose items by hand and discard any unusable ones, I am human and unfortunately err from time to time.  I’m much happier knowing that I can guarantee each bag or lot will contain as many usable items as I advertise.

Also, I’ve never been in the business of giving only the minimum.  I expect more from myself, and I aim to give much more than that to my customers.  So you can rest assured that every purchase you make from my shop will contain AT LEAST as many usable items as you expect it to.  And when your new goodies arrive, if you want to, feel free to count and find out exactly how many are really in there.  ;-D

 

Such a knockout!

Electricians don’t just work with wire.  In fact, as I was surprised to learn on my first site, electricians spend more time working with the pipe that’s going to carry the wire than with the wire itself!  Where the pipes join together, we install junction boxes – usually steel – in which we cut, drill, or punch holes for the pipe.  The pieces that get left when we cut the holes look like this:

IMG_20140909_183812_315

You can see flat ones, which come pre-punched at the factory, then are tacked back into the box before shipping.  That way, they’re easy to remove if we want, but if we don’t want a hole there they stay put and provide a secure barrier to protect the wire.  There are also a couple crescent-shaped ones in there, which are punched eccentrically (rather than concentrically) so you can choose what size hole you want.

Notice the difference between those and the wavy ones.  There’s a size difference, of course, but I love the shape of the wavy ones!  They get that shape because they’re punched out locally with a tool that cuts the hole in two or three places, rather than all around the diameter, at the same time.  So much interest!  So fascinating!  They’re like little pieces of art, all by themselves!

Well, to me they are.  To the rest of the crew they’re so many pieces of detritus, to be swept out with the rest of the garbage.  But the first time I saw one, I saw beauty.  So I took it home and filed it and turned it into this:

First Neck 01

 

Oh, yeah.  THAT’S WHAT I’M TALKING ABOUT, BABY!!!  A knockout necklace that’s made of a knockout! And hopefully will get bought and then worn by a knockout.  ;-D  You can buy it here, BTW.  Just sayin’.

Now I have a million ideas on how I can use these.  With leather, on chain, drill holes in a whole series of them and make a jingly anklet…  So.  Many.  Ideas.

But they all start with finishing the damn things.  *le sigh*  Which means a lot of work.

IMG_20140909_183915_879

 

Have to grind off the sharp edges, file or sand away the scrapes and dings, then get them to whatever level of finish I want.

IMG_20140909_191503_628

 

Aside: I am absolutely giddy with excitement that I finally got to use my polishing compounds!  Squee!

With them and my handy-dandy rotary tool, gift of my darling HSO (who reads this blog but I’d say that even if he didn’t), I got a near-mirror finish on one of them:

IMG_20140909_193844_022

 

The photo doesn’t do it justice, but it is SHI-NY!  Still has some imperfections, but I did rush it a bit.  And I’m relearning stuff I only learned halfway, twenty years ago.  Plus, I’m figuring out how to get different finishes, and I’m not even sure what I want or what my options are.  So I’m giving myself some wiggle room.

At any rate, this is how I spent a couple hours this evening.  Very enjoyable hours, too, though my hands hurt after a while from all the vibration.  Next step is to try out my rotary tumbler with some steel shot, so I can see what kind of results that gives me, then I’ll try them in different orders and see what happens then.  SCIENCE!

Shocking news

Today is a red-letter day, my friends.  Today I’m going to tell you about…  Making jewelry!  Or at least, my jewelry business activities.

Yes, I know!  Unprecedented, isn’t it?  I’m pretty sure I talk about everything *but* jewelry on this blog.  But I figure, hey, why not?  And since I’ve lately been devoting a lot more time to building up my business, I figure I ought to take a crack at it.

What have I been doing, you may ask.  (Or you may not.  But I’m going to tell you anyway.)  Well, first, when I moved the bulk of my item listings to Zibbet, I also started cruising the fora (plural of forum, for those of you who prefer your Latin without the standard American twist) and found a thriving, warm community.  I got involved with a group that does weekly “flash attacks,” trading links and promoting each others’ shops and items.

The best time for me to do this work turned out to be on my morning and afternoon commute, so I ponied up the cash for wifi service on the ferry and signed up for a Hootsuite account to manage all my posts.  And it’s been working brilliantly!

I sign on in the morning and schedule tweets to go out all day while I’m at work.  Generally, I do half of them for the “flashee” at the time, and the other half are divided between my own items and other random things like Seahawks news or current events or useful articles.  I really enjoy finding the twitter handle of someone affiliated with whatever I’m posting and tagging them.  ;-D

One thing I’m really trying to do is provide more content than just sales pitches.  I mean, who’s going to follow me – and pay attention – if all I do is advertise all day?  No, I need to have more to attract people than just that.  So after I schedule out a dozen or so messages (more if the mood strikes) I look at what’s trending and find a discussion to contribute to.  Like the #YesAllWomen, for example, though I wasn’t doing this yet when that got started.

Basically, I’m trying to interact with others in the Twitterverse in a way that encourages them to pay attention.  Thus far I’m meeting with some results.  Pretty much every day something that’s come out of my feed gets attention from outside our flash attack group.  Which is the mark of success for what I’m doing – we’re all very attentive to each other, so when these ladies share my tweets it’s awesome, but doesn’t show the same results that I’m looking for in my other posts.

It’s a slow process, but I think it’s working.  At least a bit.  Which is really all I can ask for!  As my darling HSO is fond of saying, “Progress is.”

Songwriter’s block

I blog when I can’t write a song
‘Cause the words are all coming out wrong
The rhythm and rhyme
All end up out of time
And the meter in one line always seems to end up way too long for the rest of it, but I can’t seem to cut it shorter because I really want to say what’s already in there, you know? And I can never find a good way to restate it more concisely while retaining the meaning I tried to get at in the first place. So it really screws up the whole intent and the – um… Yeah.